Engineers are available to assist.
Our line of adapter plates are designed for our linear positioning stages and slides to permit a variety of breadboard applications. Convenient counterbored slots offer plenty of clearance room while allowing for adjustment of position. Although designed for direct mounting to a breadboard, each has a centered ¼-20 mounting hole for vertical positioning with our posts and post holders. The mounting holes “E” separated by dimension “F” match the slide/stage base counterbored mounting holes. Use dimension “A” to match the width for ball stages (not all slides conform to this).
Note: Stock number #53-922 has no slots, only 4 c'bored clearance holes for #¼ SHCS.
For use with our translation stages and ball bearing slides.
This precision-machined adapter plate enables secure and flexible integration of linear positioning stages, slides, and breadboard-mounted systems. The centered ¼-20 threaded hole supports vertical mounting using standard optical posts and post holders. Ideal for creating modular setups in lab environments, this adapter plate offers compatibility with a wide range of motion control components. The counterbored slots ensure adjustability while maintaining a stable, flush connection, making it a versatile solution for prototyping, alignment systems, or research instrumentation.
It’s designed to interface with Edmund Optics’ linear translation stages, ball bearing slides, standard breadboards, and optical posts.
Yes, the centered ¼-20 mounting hole allows secure vertical mounting with standard posts and post holders.
The counterbored slots provide adequate clearance, allowing for fine adjustment of the mounting position during setup or alignment.
Yes, it’s fully compatible with common breadboard hole patterns for direct and stable mounting.
| A | B | C | D | E | F | Stock No. | |
| 1.25" Adapter Plate Assembly | 1.25" | 2.75" | 2.00" | 1.00" | 4-40 | 0.88" | #53-922 |
| 1.75" Adapter Plate Assembly | 1.75" | 3.75" | 3.00" | 1.00" | 6-32 | 1.12" | #53-923 |
| 2.62" Adapter Plate Assembly | 2.62" | 4.75" | 4.00" | 2.00" | ¼-20 | 2.00" | #53-924 |
| 5.00" Adapter Plate Assembly | 5.00" | 6.75" | 6.00" | 4.00" | ¼-20 | 4.00" | #53-925 |
 |
|||||||
or view regional numbers
QUOTE TOOL
enter stock numbers to begin
Copyright 2023, Edmund Optics Inc., 101 East Gloucester Pike, Barrington, NJ 08007-1380 USA
California Consumer Privacy Acts (CCPA): Do Not Sell or Share My Personal Information
California Transparency in Supply Chains Act